CONDEFLEX NSHTÖU-V 0,6/1KV
MINES | RUBBER
Construction
Central Element: Central aramid (Kevlar)
Conductor: FlexibleStranded tinned copper wire Class 5 acc/. UNE-EN 60228
Insulation: DIN VDE 0207-20 - Ethylene Propylene Rubber (EPR) type 3GI3.
Identification: VDE 0293-308 up to 5 conductors., JZ: Black Numbered + Yellow/Green, OZ: Black numbered
Assembly: Concentrically assembled insulated conductors.
Filling sheath: DIN VDE 0207-21 - Rubber type GM1b.
Braid Shielding: Anti-torsion shielding in polyester braid.
Outer cover: DIN VDE 0207-21 - High-strength chlorinated rubber type 5GM5.
Color: Yellow Or Black
Oil & hydrocarbon resistant
CE
Flame retardant
Weather resistant
Mechanical protection
Low gas corrosiveness
UV resistant
Flexible cable
Halogen free
RoHSTechnical data / Regulations
Operating voltage: 0,6/1KV
Test voltage: 3.500 V C.A. 5 min.
Operating temperature: -40...+80ºC (fijo), -25...+80ºC (Móvil).
Standards:
(Construction) Basado en DIN VDE 0250-814 - Flexible rubber power cables for 1kV rated voltages
(Insulation) DIN VDE 0207-20 - Ethylene Propylene Rubber (EPR) type 3GI3.
(Sheath) DIN VDE 0207-21 - Rubber type GM1b.
(Sheath) DIN VDE 0207-21 - High-strength chlorinated rubber type 5GM5.
(Fire) UNE-EN 60332-1 (IEC 60332-1) - Flame-retardant.
Observations
Winding speed:
In Horizontal Festoon applications: <180 m/min
In Vertical Festoon applications: <120 m/min
Maximum load tension: 30 N/mm²
Applications
Flexible power cable with central Kevlar reinforcement, specially designed for vertical mobile applications where the cable is subjected to tensile and torsional stresses, e.g. on container cranes, excavation equipment in mining and tunnelling, etc. Rubber outer sheath with very good resistance to abrasion and crushing as well as wet or humid environmental conditions.
Info request
Fill in the following fields to request the cable technical sheet in PDF format and the Declaration of Performance (DOP)